D-Link MYDLINK DNR-322L User Manual

8D-Link DNR-322L User Manual
Section 1 - Product Overview
Rear Panel (Connections)
COMPONENT DESCRIPTION
Cover Lock This lock is used to remove the cover when unlocked. Locking it will restrict the removal of the top cover.
Cooling Fan
The cooling fan is used to cool the hard drives and features speed control. When the unit is rst powered on the
fans rotate at a low speed and rotate at a high speed when the temperature rises above 49 °C.
Reset Button Press this button for more than 5 seconds to reset the unit to factory defaults.
Power Receptacle Connect the supplied power cord to the receptacle.
GigabitEthernetPort
UsetheGigabitEthernetPorttoconnectthedevicetothelocalnetwork.TheportisequippedwithbothaLAN
LINK(R)andTracLED(L)toindicateconnectivityandtracrespectivelytothelocalLAN
Security Lock This lock can be used to tie the DNR-322L to the desk to prevent theft. Cables are sold separately.
Cover Lock
Cooling Fan
Security Lock
Reset Button
Cable Hook
Power Receptacle
GigabitEthernetPort

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)