EasyManuals Logo
Home>D-Link>Network Hardware>MYDLINK DNR-322L

D-Link MYDLINK DNR-322L User Manual

D-Link MYDLINK DNR-322L
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #88 background imageLoading...
Page #88 background image
84D-Link DNR-322L User Manual
Section 4 - Troubleshooting
Respond to a Critical RAID Volume
How the unit responds to a critical RAID Volume depends on the RAID level of your Volume and whether you have a spare
drive available:
For RAID 1 Volumes, if a spare drive is available, the RAID Volume will begin rebuilding itself automatically.
For RAID 1 Volumes, when no spare drive is available, you must replace the failed disk drive. The RAID Volume will begin rebuilding itself when you install the new disk drive.
RAID 0 Volumes go oine after a disk drive failure. A RAID 0 volume cannot be rebuilt. All data on the volume will be lost.
Restore the Default Administrators Password
Ifyouforgetthepassword,youcanresetthepasswordfor“admintothedefaultpassword:<empty>. Press and hold the reset
button for 5 seconds until the Power LED ashes three times. The Administrator password will now be blank.
Caution
When you reset or recover your unit, sometimes it will cause data corruption. Backup your recorded data before resetting your
unit.
Install ActiveX
IfyoucannotseethecompletepageofthesystemwhenusingInternetExplorer,theActiveXinstallationprocessmaynotbe
complete.
Step 1: Click the Live View/Playback button on the top right.
Step2:ThebrowserwillaskwhethertoinstallActiveX.
Step 3: Click the upper bar to begin the installation process.
Step 4: Click the Install button to complete the process.
Cannot Login to the Unit through Internet Explorer
1. Check the settings of your anti-virus software.
2. Adjust the settings of or disable anti-virus software.

Other manuals for D-Link MYDLINK DNR-322L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link MYDLINK DNR-322L and is the answer not in the manual?

D-Link MYDLINK DNR-322L Specifications

Power IconPower
power adapterDC 12V/4 A
max power consumption25.20 W
standby state max power consumption0.23 W
Operating Environment IconOperating Environment
operating temperature0˚ to 55˚ C (32˚ to 131˚ F)
storage temperatureOperating: 5% to 90% (non-condensing)
Memory IconMemory
flash rom128 MB
ram256 MB DDR II
Weight and Dimensions IconWeight and Dimensions
dimension4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight0.875 kg (1.93 lbs)

Related product manuals