D-Link MYDLINK DNR-322L User Manual

13D-Link DNR-322L User Manual
Section 3 - Installation
Power and Device Selection
Connect the power adapter to the power receptor on the back of the device. Press the
power button located under the faceplate LEDs to turn on the device. Click Next to
continue.
With the power on check that the Power LED is solid. If it is solid, answer Yes to the
conrmation window otherwise select No and wait for the power connection to the NVR.
If the connection is good then check that the hard drives are installed correctly and have
no other issues. Click Next to continue.
Note: When you select your device from the list, it will cause the LEDs to blink to conrm
the device selection.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)