D-Link MYDLINK DNR-322L User Manual

86D-Link DNR-322L User Manual
Appendix B - Replacing or Adding a new Hard Drive
Replacing or Adding a New Hard Drive
It is recommended that you backup your important les before replacing or adding a new hard drive to the NVR.
Replacing a Hard Drive:
Please make sure the power is o before replacing a hard drive. After you have installed the new drive, turn on the NVR and
then connect to the Web UI. The NVR will prompt you to format the new drive (Standard, RAID 1 mode) or both drives (JBOD,
RAID 0 mode).
Adding a New Hard Drive:
The NVR is able to work with one single hard drive under Standard mode. Please make sure the power is o before installing
a second hard drive.
After you have installed the new drive, turn on the NVR and then connect to the Web UI. The NVR will prompt you to format
the new drive.
Note: Formatting a hard drive will erase the data stored on the hard drive. Please backup important data before formatting
a hard drive.

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)