D-Link MYDLINK DNR-322L User Manual

29D-Link DNR-322L User Manual
Section 3 - Conguration
Type admin for the username and
leave the password eld blank.
Click Exit Wizard to nish the auto search.
Click Login
Please connect your network camera(s) to network and power on them.
NVR will search your available camera(s) in the local network (LAN) and add them to the NVR List in the NVR automatically.
NVR will use default login ID: admin and blank password to add new camera(s).
If there are camera(s) found, NVR will start manual recording at the last step.
Note:
If you have existing camera(s) with dierent ID and password, NVR will add the camera(s) but not able to connect and record.
You can change the settings in the NVR Setup page.
Auto Search Camera

D-Link MYDLINK DNR-322L Specifications

Power

power adapter	DC 12V/4 A
max power consumption	25.20 W
standby state max power consumption	0.23 W

Operating Environment

operating temperature	0˚ to 55˚ C (32˚ to 131˚ F)
storage temperature	Operating: 5% to 90% (non-condensing)

Memory

flash rom	128 MB
ram	256 MB DDR II

Weight and Dimensions

dimension	4.53 x 5.76 x 7.03 inches (115 x 146.4 x 178.5 mm)
weight	0.875 kg (1.93 lbs)