DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Print Server
On the Print Server page, you can configure the router as a print server. Being configured in this
way, the router will allow your LAN users to share the printer connected to the USB port of the
router.
To connect a printer to the router, power off both devices. Connect the printer to the USB port of
the router, power on the printer, then power on the router.
Figure 114. The Print Server page.
To configure the router as a print server, click the ENABLE button. Upon that the Status of
printer field is displayed on the page.
If you don't want to use the router as a print server, click the DISABLE button.
Page 145 of 236
To Next Page
Loading...
Need help?
General