DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the router's settings
• restore the factory default settings
• create a backup of the router's configuration
• restore the router's configuration from a previously saved file
• save the current settings to the non-volatile memory
• reboot the router or configure automatic reboot on a schedule
• change the web-based interface language
• update the firmware of the router
• configure automatic notification on new firmware version
• view the system log; configure sending the system log to a remote host and/or a USB
storage connected to the router
• check availability of a host on the Internet through the web-based interface of the router
• trace the route to a host
• allow or forbid access to the router via TELNET
• configure automatic synchronization of the system time or manually configure the date and
time for the router.
Page 211 of 236
To Next Page
Loading...
Need help?
General