DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
UDPXY
On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY
application. The UDPXY application transforms UDP traffic into HTTP traffic. This application
allows devices which cannot receive UDP streams to access stream video.
Figure 148. The Advanced / UDPXY page.
To enable the application, move the Enable switch to the right.
Upon that the following fields are displayed on the page:
Parameter Description
Port The port of the router which the UDPXY application uses.
Maximum client number
Maximum number of devices from the router's LAN which will be
served by the application.
Buffer size for incoming
data
Size of intermediate buffer for received data.
By default, the minimum acceptable value is specified.
Buffer size for data
transferred to client
Size of intermediate buffer for transmitted data.
By default, the minimum acceptable value is specified.
WAN interface
From the drop-down list, select a WAN connection which will be
used for operation with streaming video.
After specifying the needed parameters, click the APPLY button.
Page 183 of 236
To Next Page
Loading...
Need help?
General