20
DCS-900W Configuration (continued)
Advanced > System
The default settings are as follows:
Default IP – 192.168.0.20
Subnet Mask – 255.255.255.0
Default Gateway – 0.0.0.0
Camera Name:
This field is used for entering a descriptive name for the camera. The default setting for
the Camera Name is DCS-900W. The maximum length is 32 characters (Printable
ASCII).
Location:
This field is used for entering a descriptive name for the location used by the DCS-
900W.
IP Assignment:
There are two options to select from the IP Assignment, either Manually Assign or
Assign Automatically Using.
Manually Assign
You can click Manually Assign and directly enter a valid IP Address for your camera.
Remember that your camera’s IP Address must correspond to your network settings
if you wish to change it here.
Important Information
Access to the Internet Camera is gained by assigning a proper IP Ad-
dress. Please make sure to use a vacant IP address when you assign the
IP Address for the Internet Camera. This will prevent IP Address conflicts.
To Next Page
Loading...
Need help?
General