D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
7
3
COMMAND SYNTAX
The following symbols are used to describe how command entries are made and values and arguments are specified in this
manual.
Note: All
commands are case-sensitive. Be sure to disable Caps Lock or any
other unwanted function that changes text case.
<angle brackets>
Enclo
ses a variable or value that must be specified.
Purpose
config ipif <S
ystem> [{ipaddress <network_address> | vlan <vlan_name
32> | state [enable | disable}] | bootp | dhcp]
Syntax
In the above syntax example, use
rs must supply an IP interface name in the
<System> space, a VLAN name in the <vlan_name 32> space, and the
network address in the <network_address> space. Do not type the angle
brackets.
Description
config ipif System ipad
dress 10.24.22.5/8 vlan Design state enable
Example Command
[square brackets]
Enclo
ses a required value or set of required arguments. One value or
argument can be specified.
Purpose
cre
ate account [admin | user] <username 15>
Syntax
In the above syntax example, use
rs must specify either an admin or a user
level account to be created. Do not type the square brackets.
Description
cre
ate account admin ctsnow
Example Command
| vertical bar
Separates two or mo
re mutually exclusive items in a list, one of which must
be entered.
Purpose
cre
ate account [admin | user] <username 15>
Syntax
In the above syntax example, use
rs must specify either admin, or user. Do
not type the vertical bar.
Description
cre
ate account admin ctsnow
Example Command

D-Link xStack DES-3200 Series Specifications

General

Brand	D-Link
Model	xStack DES-3200 Series
Category	Network Router
Language	English