EasyManuals Logo
Home>D-Link>Network Router>xStack DES-3200 Series

D-Link xStack DES-3200 Series User Manual

D-Link xStack DES-3200 Series
531 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #193 background imageLoading...
Page #193 background image
xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
18
8
21
802.1X COMMANDS
The Switch implements IEEE 802.1X Port-based and Host-based Access Control. This mechanism is intended to allow only
authorized users, or other network devices, access to network resources by establishing criteria for each port on the Switch that a
user or network device must meet before allowing that port to forward or receive frames. The 802.1X commands in the Command
Line Interface (CLI) are listed (along with the appropriate parameters) in the following table:
Command Parameters
enable 802.1x
disable 802.1x
show 802.1x [auth_state | auth_configuration ] {ports <portlist>}
config 802.1x capability ports [<portlist> | all] [authenticator | none]
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] | port_control [force_unauth |
auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> |
supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req
<value 1-10> | reauth_period <sec 1-65535> | enable_reauth [enable |
disable]}] (1)
config 802.1x auth_protocol [local |radius_eap]
config 802.1x init [port_based ports [<portlist> | all>] | mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
config 802.1x auth_mode [port_based | mac_based]
config 802.1x reauth [port_based ports [<portlist> | all] | mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
config radius add <server_index 1-3> [<server_ip> key <passwd 32> [default | {auth_port
<udp_port_number 1-65535> | acct_port <udp_port_number 1-65535> |
timeout <int 1-255> | retransmit <int 1-255>} (1) ]
config radius delete <server_index 1-3>
config radius <server_index 1-3> {ipaddress <server_ip> | key <passwd 32> [auth_port
<udp_port_number 1-65535> acct_port <udp_port_number 1-65535>] |
timeout <int 1-255> | retransmit <int 1-255>} (1)
config radius parameter { timeout <int 1-255> | retransmit <int 1-255>} (1)
show radius
create 802.1x guest_vlan {<vlan_name 32>}
config 802.1x guest_vlan ports [<portlist> | all] state [enable | disable]
delete 802.1x guest_vlan {<vlan_name 32>}
show 802.1x guest_vlan
show auth_statistics {ports <portlist>}
show auth_diagnostics {ports <portlist>}
show auth_session_statistics {ports <portlist>}
show auth_client

Table of Contents

Other manuals for D-Link xStack DES-3200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DES-3200 Series and is the answer not in the manual?

D-Link xStack DES-3200 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DES-3200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals