D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
30
6
The maximum attempts for delivering mail to recipients is three. Mail message delivery attempts will be tried every five minutes
until the maximum number of attempts is reached. Once reached and the message has not been successfully delivered, the
message will be dropped and not received by the mail recipient.
If the Switch shuts down or reboots, mail messages in the waiting queue will be lost.
The SMTP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table:
Command Parameters
enable smtp
disable smtp
config smtp {server <ipaddr> | server_port <tcp_port_number 1-65535> |
self_mail_addr <mail_addr 64> | [add mail_receiver <mail_addr
64> | delete mail_receiver <index 1-8>]} (1)
show smtp
smtp send_testmsg
Each command is listed, in detail, in the following sections:
enable smtp
Used to ena
ble the Switch as a SMTP client.
Purpose
enabl
e smtp
Syntax
This
command, in conjunction with the disable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable SMTP on the Switch:
DES-3200-28:4#enable smtp
Command: enable smtp
Success.
DES-3200-28:4#
disable smtp
Used to disab
le the Switch as a SMTP client.
Purpose
disa
ble smtp
Syntax
This
command, in conjunction with the enable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions

D-Link xStack DES-3200 Series Specifications

General

Brand	D-Link
Model	xStack DES-3200 Series
Category	Network Router
Language	English