D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
52
3
In the “Password Recovery Mode” only the following commands can be used.
Command Parameters
reset config The reset config command resets the whole configuration will be
back to the default value
reboot The reboot command exits the Reset Password Recovery Mode and
restarts the switch. A confirmation message will be displayed to allow
the user to save the current settings.
reset account The reset account command deletes all the previously created
accounts.
reset password
{<username>}
The reset password command resets the password of the specified
user. If a username is not specified, the password of all users will be
reset.
show account The show account command displays all previously created
accounts.

D-Link xStack DES-3200 Series Specifications

General

Brand	D-Link
Model	xStack DES-3200 Series
Category	Network Router
Language	English