D-Link xtreme n duo dap-1522 User Manual

40D-Link DAP-1522 User Manual
Section 3 - Configuration
Save to Local
Hard Drive:
Load from Local
Hard Drive:
Restore to
Factory Default:
Reboot the
Device:
Clear Language
Pack:
Use this option to save the current access point
configuration settings to a file on the hard disk of
the computer you are using. First, click the Save
button. You will then see a file dialog, where you can
select a location and file name for the settings.
Use this option to load previously saved access
point configuration settings. First, use the Browse
control to find a previously save file of configuration
settings. Then, click the Load button to transfer
those settings to the access point.
This option will restore all configuration settings
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Click to reboot the access point.
Click to clear the language pack. This will put the
web UI back to English.
System

D-Link xtreme n duo dap-1522 Specifications

Physical Interfaces

gigabit LAN ports	4
push-button for Wi-Fi Protected Setup	1
three-way switch	1

Weight and Dimensions

dimensions	4.4” x 5.7” x 1.3”
packaging dimensions	8.2” x 10.8” x 2.7”
weight	0.5 lbs
packaging weight	1.7 lbs