DAB E.sybox User Manual

ENGLISH
58
GB
7.5.4 MS: Measuring system 87
7.5.5 AS: Association of devices 87
7.5.6 PR: Remote pressure sensor 88
7.6 Technical Assistance Menu 88
7.6.1 TB: Water lack blockage time 88
7.6.2 T1: Switch-off time after low pressure signal 89
7.6.3 T2: Delay in switching off 89
7.6.4 GP: Proportional gain coefcient 89
7.6.5 GI: Integral gain coefcient 89
7.6.6 RM: Maximum speed 89
7.6.7 Setting the number of devices and of reserves 89
7.6.8 NA: Active devices 89
7.6.9 NC: Simultaneous devices 89
7.6.10 IC: Conguration of the reserve 90
7.6.10.1 Examples of conguration for multipump systems 90
7.6.11 ET: Max. switching time 90
7.6.12 AY: Anti Cycling 91
7.6.13 AE: Enabling the anti-block function 91
7.6.14 AF: Enabling the anti-freeze function 91
7.6.15 Setup of the auxiliary digitali inputs IN1, IN2, IN3, IN4 91
7.6.15.1 Disabling the functions associated with the input 92
7.6.15.2 Setting external oat function 92
7.6.15.3 Setting auxiliary setpoint input function 92
7.6.15.4 Setting system enabling and fault reset 93
7.6.15.5 Setting low pressure detection (KIWA) 94
7.6.16 Setup of the outputs OUT1, OUT2 94
7.6.17 O1: Setting output 1 function 95
7.6.18 O2: Setting output 2 function 95
7.6.19 FW: Firmware update 95
7.6.20 RF: Fault and warning reset 95
7.6.21 PW: Change password 95
7.6.21.1 Password for multipump systems 96
8. Reset and factory settings 96
8.1 Reset generale del sistema 96
8.2 Factory settings 96
8.3 Restoring the factory settings 96
9. Particular installations 98
9.1 Inhibiting self-priming 98
9.2 Wall installation 99
9.3 Installation with Quick Connection 99
9.4 Multiple Sets 99
9.4.1 Introduction to multipump systems 99
9.4.2 Making a multipump system 99
9.4.3 Wireless communication 100
9.4.4 Connection and setting of the inputs 100
9.4.5 Parameters linked to multipump operation 100
9.4.6 First start of the multipump system 101
9.4.7 Multipump adjustment 101
9.4.8 Assigning the starting order 102
9.4.9 Max. switching time 102
9.4.10 Reaching the maximum inactivity time 102
9.4.11 Reserves and number of devices that participate in pumping 102
9.4.12 Wireless Control 103
10. Maintenance 103
10.1 Accessory tool 103
10.2 Emptying the system 105
10.3 Non-return valve 105
10.4 Motor shaft 106
10.5 Expansion Vessel 106
11. Updang the e.Sybox rmware 106
11.1 General 106
11.2 Updating the rmware 107
11.2.1 Updating between one e.sybox and another 107
11.2.1.1 Manual updating 107
11.2.1.2 Automatic updating 107
11.2.1.3 Semiautomatic updating 108
11.2.2 Updating the e.sybox by e.sylink 109
12. Troubleshooting 109
13. Disposal 110
14. Guarantee 110

DAB E.sybox Specifications

General

Brand	DAB
Model	E.sybox
Category	Water Pump
Language	English