ENGLISH
64
GB
It results that, with SP = 3.0 bar, the system is able to ensure a constant
pressure at the users that require ow rates respectively between 0 and
85 litres/minute for e.sybox and between 0 and to for e.sybox 30/50. For
higher ow rates the system works according to the characteristic curve of
the electropump at maximum rotation speed. For ow rates lower than the
limits described above, as well as ensuring constant pressure, the system
reduces the absorbed power and therefore the energy consumption.
The above performances are to be considered measured at am-
bient temperature and water at about 20°C, during the rst 10
minutes of motor operation, with water level at suction at a depth
of no more than 1 metre
As the suction depth increases, the performance of the electro-
pump decreases.
1.4 Technical characteristics
e.sybox e.sybox 30/50
ELECTRIC POWER
SUPPLY
Voltage 1 x 220/240 ~ VAC
Frequency 50/60 Hz
Maximum current 10 A 6,8 A
Maximum power 1550 W 900 W
CONSTRUCTION
CHARACTERISTICS
Overall dimensions 565x265x352 mm without
feet
Empty weight (excluding
packaging)
24,8 kg 22,5 kg
Protection class IP x4
Motor insulation class F
HYDRAULIC
PERFORMANCE
Maximum head
65 m 50 m
Maximum ow rate 120 l/min 85 l/min
Priming <5min at 8m <5min a 7m
WORKING
CONDITIONS
Maximum working
pressure
8 bar
Liquid temperature max 40 °C
Environment temperature
max
50 °C
Storage environment
temperature
-10÷60 °C
FUNCTIONALITY
AND
PROTECTIONS
Constant pressure
Wireless communication
Protection against dry running
Antifreeze protection
Anticycling protection
Motor overload protection
Protection against abnormal supply voltages
Protection against excess temperature
2- INSTALLATION
The system is designed for indoor use: do not install the system
outdoors and/or directly exposed to atmospheric agents.
Figura 6
0
0
10
20
20
30
40
40
50
60
60
70
120 140
H [m]
Q [l/min]
e.sybox
e.sybox 30/50
80 100
To Next Page
Loading...
Need help?
General
