13
If the main switch lever is (ON), push
it 2 or 3 times. This switch is used when
passing the other vehicle.
If the main switch lever is (ON), push
the horn button make horn sound.
If the main switch lever is (ON) and
put into the winker switch, the winker
(winker indicator) operates.
(R)⋯⋯to the right.
(L)⋯⋯to the left.
Regardless of main lever switch position, the
emergency switch can be operated. (If the
emergency switch operates for a long time,
this may cause battery discharge.)
If the Smart key is within 1 meter, push the
seat button then the seat opens. But, at the
time that the battery of the vehicle or the Smart
key’s battery are discharged or the seat does
not open at the area of strong electricity, by
using the key to open the inner box lead and
pull the seat wire loop, the seat can be opened.
PASSING SWITCH
Passing Switch
HORN BUTTON
Horn Button
WINKER SWITCH
Winker Switch
EMERGENCY SWITCH
SEAT BUTTON
Emergency Switch
Seat Button
Seat Wire Loop
●
The winker switch does not return
automatically. If finishing to use it,
surely return the winker switch to the
original position.
●
If you forget returning, this may
occur to interrupt the other vehicle’s
riding.