53
There are little difference depending upon the vehicles.
As for the difference, please refer to each vehicle’s user’s manual.
If you think that your daily inspection has something wrong,
please visit to near designated service shop and request to repair.
DAILY INSPECTION METHOD
INSPECTION METHOD, TIPS
Brake
•
Braking on brake lever free play and it’s operation.
(
Brake lever free play
)
If pulling brake lever and you feel it soft,
it means that air may mixes in brake
fluid. If yes, check the capacity of brake
fluid and install the connection area of
brake hose or deflate air.
Also, drive the vehicle on the dry road,
operate front and rear brake separately to
check whether braking performance well
done or not.
INSPECTION METHOD, TIPS
(
Status of braking performance
)
TIRE
•
Checking of the air pressure of tire
Erect the main stand at flat place, move
the steering handle and position the
upper side of reserve tank cap
horizontally. Or upright the frame and
the brake fluid side being flat with level
line.
Check whether the brake fluid in brake
reserve tank is over the low level.
By seeing deformation status of surface
of tire, check whether air pressure is
enough or not.
If you drive long distance or drive at
high speed, the inspection of air pressure
by tire gauge is essential.
FRONT
REAR
1 person
2.00 kg/㎠
2.40 kg/㎠
2 persons
2.00 kg/㎠
2.50 kg/㎠
●
Be sure to use the designated brake fluid.
●
If not, the brake fluid may be contaminated or cause
something wrong of brake system.
FREE PLAY FREE PLAY
To Next Page
Loading...
Need help?
General
