55
INSPECTION METHOD, TIPS
Check whether there is something wrong
at low speed or accelerating.
LIGHT SYSTEM AND DIRECTION INDICATORS
CHECKING ABOUT LOW SPEED AND ACCELERATION(
※※
)
Turn on the main switch and check
whether there is something wrong in
head light, tail light, brake light and
direction signal’s lighting status.
Also, check whether there is
contamination or damage of lens.
Check whether there is something wrong
causing inconvenience to riding.
MAINTENANCE
Remarks
) (※)
Inspection is checked on the conditions, driving distance, the
situation of driving.
As for other inspections, please do once daily before driving.
Check whether the fuel gauge at engine
start is within the “ E “ range(red) or
whether the main switch is “ ON “.
If the fuel gauge is under the “ E “
range(only one space), do not hesitate to
fuel replenishing.
(1)
Check by eye whether the engine oil
leaks from the engine.
(2)
Check by eye whether the cooling
water leaks from the engine or radiator
(3)
Check by eye whether the fuel leaks
from the fuel tank, throttle body.
Erect the main stand, start the engine and
check whether the throttle operates well
or not by twisting or napping.
Especially, on the condition that the
throttle grip is napped, check whether the
engine RPM goes up improperly.
INSPECTION METHOD, TIPS
FUEL CAPACITY
OPERATING THROTTLE GRIP(CABLE)
LEAKAGE OF ENGINE OIL, FUEL
To Next Page
Loading...
Need help?
General
