10
DAHUA N51BD22 CAMERA SETUP
If your system may has one or more Dahua N51BD22 bullet cameras perform the
following steps.
Collect the following components:
7. Dahua camera on junction box with tripod mount and Ethernet connector.
8. Standard camera tripod with 1/4-20 threaded mount
9. POE164 Injector. This camera may also be used with the Planet POE171
single-output, 60W injector or a FSD-504HP due to their higher, 60W outputs.
10.Ethernet 6’ cable
11.Ethernet 100’, 196’ or 300’ all-weather cables. Note: The maximum length for
a camera to injector cable is 100 meters or 328 feet.
Setup Procedure:
1. Open the tripod in the selected location.
2. Place the camera assembly on top of the tripod and using the knob under the
tripod, screw the tripod treads into the bottom of the camera assembly.
To Next Page
Loading...
Need help?
General
