Dahua DHI-VTO4202F Series User Manual

37
8.2.1 Enabling UPnP Services
Select Network > UPnP.
Enable the services listed as needed.
Select Enable.
Click Save.
8.2.2 Adding UPnP Services
Select Network > UPnP.
Click Add.
Configure the parameters as needed.
Add a UPnP service
Table 8-2 Parameter description
Parameter Description
Service Name
Enter the information as needed.
Service Type
Protocol Select TCP or UDP as needed.
Internal Port Use port number from 1024 through 5000.
 Do not use port number 1–1023 to avoid conflict.
 If you need to configure this function for multiple devices, make sure that
the ports are not the same.
 The port number you use must be available.
 The internal and external port number must be the same.
External Port

Dahua DHI-VTO4202F Series Specifications

General

Brand	Dahua
Model	DHI-VTO4202F Series
Category	Intercom System
Language	English