8
TCP/IP information Figure 3-7
Enter each parameter, and then click Save. Step 2
The VTO will automatically restart. You need to add the IP address of your PC to the same
network segment as the VTO to log in again.
Configuring SIP Server 3.5
When connected to the same SIP server, all VTOs and VTHs can call each other. You can use a VTO or
other servers as the SIP server.
Select Network > SIP Server. Step 1
SIP server Figure 3-8
Select the server type as needed. Step 2
If the current VTO works as the SIP server, enable SIP Server, and then click Save.
To Next Page
Loading...
Need help?
General
