11
Register Password Keep the default value.
Build No.
Available only when other servers work as the SIP server.
Unit No.
IP Address VTO IP address.
Username
VTO web page login username and password.
Password
Click Save. Step 4
Adding Room Number 3.8
You can add room numbers to the SIP server, and then configure the room number on VTHs to
connect them to the network. This section is applicable when a VTO works as the SIP server, and if
you use other servers as the SIP server, see the corresponding manual for the detailed configuration.
The room number can contain 6 digits of numbers or letters or their combination at most, and it
cannot be the same as any VTO number.
Log in to the webpage of the SIP server, and then select Household Setting > Room No. Step 1
Management.
Room number management Figure 3-12
Click Add. Step 2
To Next Page
Loading...
Need help?
General
