www.DaikinApplied.com 7 OM 1280-2 • MICROTECH UNIT CONTROLLER
Entering Password
1. Select correct password from (Table 5).
2. Press
HOME button
3. Press
ENTER button twice. “00000” will be displayed.
4.
ENTER button to advance to the right one character.
a. EXAMPLE – Enter Technician Password (06897)
b. Press
ENTER to accept “0”
c.
d. Press
ENTER to accept and shift to next digit.
e.
f. Press
ENTER to accept and shift to next digit.
NOTE: If previous value is incorrect or changed use the
BACK button to revise previously entered value.
ENTER to
accept.
g.
h. Press
ENTER to accept and shift to next digit.
i.
j. Press
ENTER. Password will be accepted and
“PWLevel” will display as “Tech”.
NOTE: Password must be re-entered if the unit is power
cycled or the password times out, whichever occurs
To Next Page
Loading...
Need help?
General