Daikin VRV Service Manual

Field Settings from Remote Controller Si30-408
42 Field Settings from Remote Controller
1. Field Settings from Remote Controller
The following modes can be selected by using the button on the remote
controller.
CHECK/TEST
Normal Mode
Check Mode
Test Operation Mode
Field Setting Mode Special Setting Mode
Service Mode
P
ress and hold the
C
H
EC
K/T
ES
T button for
a period of 4 seconds
or m
ore.
Press and hold the CHECK/TEST button
or a period of 4 seconds or more.
Press the CHECK/TEST button once.
Press the
CHECK/TEST
button once.
Press the
CHECK/TEST
button once or
after 30 minutes.
After 10 seconds
Following codes can be checked as often as
pressing CHECK/TEST button once.
C-1. Special Field Setting
(Mode No.50)
B-1. Display of Service Data
(Mode No. 40/41)
B-2. Service Setting
(Mode No. 43/44)
A-1. Setting of Individual Function for Indoor Unit
(Mode No. 10 to 15 / 20 to 25)
A-2. Setting in Centralized Control
(Mode No. 00 / 30)
A-3. Setting AirNet address
(Mode No. 03)
B.
C.
E.D.
A.
When the system put into "TEST OPERATION" mode,
forcedly thermostat on
("TEST OPERATION" is displayed on remote controller.)
· Malfunction code
· Indoor unit model code
· Outdoor unit model code
Press and hold the CHECK/TEST button
or a period of 4 seconds or more.
Press the
CHECK/TEST
button once.
Press the
CHECK/TEST
button once.
Press the CHECK/TEST
button once.

Daikin VRV Specifications

General

Brand	Daikin
Energy Efficiency	High
Control	Centralized and individual zone control
Inverter Technology	Yes
Type	Variable Refrigerant Volume (VRV)
Cooling Capacity	Varies by model
Heating Capacity	Varies by model
Refrigerant	R-32 or R-410A
Application	Commercial buildings, large residential spaces
SEER	Varies by model
HSPF	Varies by model
EER	Varies by model
COP	Varies by model
Sound Level	Varies by model
Indoor Unit Options	wall-mounted, ducted