54 Capacity controller RS8HE202 © Danfoss 2017-07 AK-PC 781A
System setup
1. Go to Configuration menu
2. Select System setup
3. Set system settings
Configuration - continued
All settings can be changed by pressing in the
blue field with the setting and then indicat-
ing the value of the required setting.
In the first field you enter a name for what
the controller will be controlling. The text
written in this field can be viewed at the top
of all screens, together with the controller's
address.
When the time is set the PC’s time can be
transferred to the controller.
When the controller is connected to a net-
work, date and time will automatically be set
by the system unit in the network. This also
applies to change-over Daylight saving.
Power failure, the clock will be kept running
for at least 12 hours.
To Next Page
Loading...
Need help?
General
