78 Capacity controller RS8HE202 © Danfoss 2017-07 AK-PC 781A
Lock conguration
1. Go to Configuration menu
2. Select Lock/Unlock configuration
3. Lock Configuration
The controller will now make a comparison of selected func-
tions and define inputs and outputs. The result can be seen in
the next section where the setup is controlled.
Configuration - continued
Press in the field against Configuration lock.
Select Locked.
The setup of the controller has now been locked. If you subsequently
want to make any changes in the controller’s setup, remember first to
unlock the configuration.
To Next Page
Loading...
Need help?
General
