Danfoss AKA 245 User Manual

AKA 245 must always be provided with earth connection. This is to guarantee safety for persons and noise
immunity.
Data communication cable
Terminals
No.
K4 H
K3 L
K1 Screen
In general, the data communication is connected from controller to controller, so that L is connected
to L, and H is connected to H. The cable must be twisted in pairs and with screen.
NOTE
As regards installation of the data communication cable, reference is made to our special literature, No.
RC.0X.A.
Connections
Supply voltage
230 V a.c.
Max. fuse 10 A
Connection of control panel
DANBUSS
AKA 245 Manual RS8DT102 © Danfoss 09/2004 7

Danfoss AKA 245 Specifications

General

Brand	Danfoss
Model	AKA 245
Category	Gateway
Language	English