Danfoss iC7 Series User Manual

3 Configuration
3.1 Configuration Overview
The parameters related to functional extensions are in parameter group 9, called I/O. Parameters are dependent on the mounting,
and will appear in the parameter menu after the functional extension has been mounted and wired.
3.2 Physical Location and Corresponding Software Address
Functional extension options are positioned in the physical slots A, B, C, D, or E, depending on the drive frame as shown in Illustra-
tion 1. When referred to in the software, the option uses a different name for the software address. The 1st slot position with an
installed option is always addressed as 2.01, the 2nd position as 2.02, and so on, regardless of which option slot the 1st option is
installed in.
Table 2: Physical Option Slot and Its Software Address
Slots
Software address
2.01
2.02
2.03
2.04
A
A (2.01)
–
–
–
C
C (2.01)
–
–
–
AB
A (2.01)
B (2.02)
–
–
AC
A (2.01)
C (2.02)
–
–
CD
C (2.01)
D (2.02)
–
–
ABC
A (2.01)
B (2.02)
C (2.03)
–
ACD
A (2.01)
C (2.02)
D (2.03)
–
CDE
C (2.01)
D (2.02)
E (2.03)
–
ACDE
A (2.01)
C (2.02)
D (2.03)
E (2.04)
AQ390830267692en-000601 / 136R0273 | 7Danfoss A/S © 2023.06
Configuration
Functional Extension Options
Operating Guide

Danfoss iC7 Series Specifications

General

Brand	Danfoss
Model	iC7 Series
Category	Media Converter
Language	English