Danfoss MCD 201 User Manual

MCD 200 Design Guide
20 MG.17.C3.02 – VLT is a registered Danfoss trademark
Accessories
■ MCD PC Software
The Danfoss MCD PC Software can be used with
MCD 201, MCD 202 and MCD 3000 to provide the
following functionality for networks of up to 99 soft
starters.
Feature MCD
201
MCD
202
MCD
3000
Operational Control
(Start, Stop, Reset, Quick
Stop)
zzz
Status Monitoring
(Ready, Starting, Running,
Stopping, Tripped)
zzz
Performance Monitoring
(Motor Current, Motor
Temperature)
zz
Upload Parameter Settings z
Download Parameter
Settings
z
Additionally, each MCD 200 soft starter connected to
the network must be fitted with a Modbus Module
(175G9000) or a Remote Operator (175G9004). See
the PC Software Operating Instructions for further
details.

Danfoss MCD 201 Specifications

General

Brand	Danfoss
Model	MCD 201
Category	Controller
Language	English