PVG 16 actuation can be done manually, hydraulically, electro-hydraulically and electrically.
PVG 16 actuation overview:
•
PVM Manual Actuation on page 69
‒
PVMD Cover on page 70
•
PVH Hydraulic Actuation on page 71
•
PVHC Electro-Hydraulic Actuation on page 73
•
PVE Electro-hydraulic Actuation on page 75
‒
PVEO on page 77
‒
PVEA Series 6 Proportional Control Actuator on page 80
PVM Manual Actuation
The PVM manual actuation cover is intended for use on any work section where the operator has to have
the ability to interact with the spool manually.
The PVM variants are based on a generic platform with a selection of additional features, enabling you to
tailor the PVM to suit the demands of any hydraulic system, which includes the following main variants:
•
PVM manual actuation or override of a function
•
Spring centering cover without manual override (PVML)
‒
Optional with lever base
‒
Optional with lever base and lever
‒
Optional flow adjustment screws
The adjustment screws are intended for limiting the spool travel and thereby the maximum achievable
flow.
PVM cover PVM dimensions
183.8 [7.24]
85 [3.35]
60 [2.36]
13 [0.51]
45.6 [1.80]
51.7 [2.04]
Control lever data
Standard control range Control lever range + float position
± 13.9° 22.3°
Technical Information
PVG 16 Proportional Valve Group
PVG 16 Actuation
©
Danfoss | December 2018 BC00000211en-000901 | 69
To Next Page
Loading...
Need help?
General
