10 Specifications
10.1 Electrical Data
10.1.1 Electrical Data, 380–480 V AC
Table 98: Electrical Data, Mains Supply 3x380–480 V AC
Normal overload
110% torque for a duration of 60 s.
Typical shaft output at 400 V [kW]
Typical shaft output at 460 V [hp]
Typical shaft output at 480 V [kW]
Continuous (at 400 V) [A]
Intermittent (60 s overload) (at
400 V) [A]
Continuous (at 460/480 V) [A]
Intermittent (60 s overload) (at
460/480 V) [A]
Continuous kVA (at 400 V) [kVA]
Continuous kVA (at 460 V) [kVA]
Continuous kVA (at 480 V) [kVA]
Continuous (at 400 V) [A]
Continuous (at 460/480 V) [A]
Maximum number and size of cables per phase
- Mains with disconnect [mm
2
(AWG)]
- Mains with fusible disconnect
[mm
2
(AWG)]
- Mains with contactor [mm
2
(AWG)]
Drive module power loss at 400 V
[W]
(1)(2)(3)
AQ262141314214en-000301 / 130R0880154 | Danfoss A/S © 2021.11
Specifications
VLT® HVAC Drive FC 102
Operating Guide
To Next Page
Loading...
Need help?
General