1.4.3 EMC Directive
Electromagnetic compatibility (EMC) means that electro-
magnetic interference between pieces of equipment does
not hinder their performance. The basic protection
requirement of the EMC Directive 2014/30/EU states that
devices that generate electromagnetic interference (EMI) or
whose operation could be aected by EMI must be
designed to limit the generation of electromagnetic
interference and shall have a suitable degree of immunity
to EMI when properly installed, maintained, and used as
intended.
A drive can be used as stand-alone device or as part of a
more complex installation. Devices in either of these cases
must bear the CE mark. Systems must not be CE-marked
but must comply with the basic protection requirements of
the EMC directive.
1.5 Conventions
•
Numbered lists indicate procedures.
•
Bullet lists indicate other information and
description of illustrations.
•
Italicized text indicates:
- Cross-reference.
- Link.
- Footnote.
- Parameter name, parameter group
name, parameter option.
•
All dimensions in drawings are in mm (in).
•
An asterisk (*) indicates a default setting of a
parameter.
Introduction Design Guide
MG06K102 Danfoss A/S © 03/2019 All rights reserved. 5
1 1
To Next Page
Loading...
Need help?
General