Danfoss VLT FC 103 Instruction Manual

4 User Interface
4.1 Local Control Panel
The local control panel (LCP) is the combined display and
keypad on the front of the unit. The LCP is the user
interface to the adjustable frequency drive.
The LCP has several user functions.
•
Start, stop, and control speed when in local
control
•
Display operational data, status, warnings and
cautions
•
Programming adjustable frequency drive
functions
•
Manually reset the adjustable frequency drive
after a fault when auto-reset is inactive
An optional numeric LCP (NLCP) is also available. The NLCP
operates in a manner similar to the LCP. See the
Programming Guide for details on use of the NLCP.
NOTICE!
The display contrast can be adjusted by pressing [Status]
and [
▲
]/[
▼
] keys.
4.1.1 LCP Layout
The LCP is divided into four functional groups (see
Figure 4.1).
Auto
On
Reset
Hand
On
Status
Quick
Menus
Main
Menu
Alarm
log
Cancel
Info
Status
1(1)
0.0%
Back
OK
0.00kW
O Remote Stop
0.0 Hz
2605 kWh
On
Alarm
Warn.
130BD390.10
a
b
c
d
0.00 A
Figure 4.1 LCP
a. Display area.
b. Display menu keys for changing the display to
show status options, programming, or error
message history.
c. Navigation keys for programming functions,
moving the display cursor, and speed control in
local operation. Also included are the status
indicator lights.
d. Operational mode keys and reset.
User Interface
Instruction Manual
42 Danfoss A/S © Rev. 2014-02-10 All rights reserved. MG16E222
44

Danfoss VLT FC 103 Specifications

General

Brand	Danfoss
Model	VLT FC 103
Category	DC Drives
Language	English