Danfoss VLT FC 103 Instruction Manual

26-44 Terminal X42/7 Output Timeout
Preset
26-5* Analog Output X42/9
26-50 Terminal X42/9 Output
26-51 Terminal X42/9 Min. Scale
26-52 Terminal X42/9 Max. Scale
26-53 Terminal X42/9 Output Bus Control 26-54 Terminal X42/9 Output Timeout
Preset
26-6* Analog Output X42/11 26-60 Terminal X42/11 Output
26-61 Terminal X42/11 Min. Scale 26-62 Terminal X42/11 Max. Scale
26-63 Terminal X42/11 Output Bus Control
26-64 Terminal X42/11 Output Timeout
Preset
28-** Compressor Functions 28-2* Discharge Temperature Monitor 28-20 Temperature Source 28-21 Temperature Unit
28-24 Warning Level 28-25 Warning Action 28-26 Emergency Level
28-27 Discharge Temperature
28-7* Day/Night Settings 28-71 Day/Night Bus Indicator
28-72 Enable Day/Night Via Bus
28-73 Night Setback
28-74 Night Speed Drop [RPM]
28-75 Night Speed Drop Override
28-76 Night Speed Drop [Hz]
28-8* P0 Optimization 28-81 dP0 Offset
28-82 P0 28-83 P0 Setpoint 28-84 P0 Reference 28-85 P0 Minimum Reference
28-86 P0 Maximum Reference
28-87 Most Loaded Controller
28-9* Injection Control 28-90 Injection On
28-91 Delayed Compressor Start
30-** Special Features 30-2* Adv. Start Adjust 30-22 Locked Rotor Protection
30-23 Locked Rotor Detection Time [s]
31-** Bypass Option 31-00 Bypass Mode 31-01 Bypass Start Time Delay
31-02 Bypass Trip Time Delay
31-03 Test Mode Activation 31-10 Bypass Status Word
31-11 Bypass Running Hours
31-19 Remote Bypass Activation
Programming Instruction Manual
56 Danfoss A/S © Rev. 2014-02-10 All rights reserved. MG16E222
55

Danfoss VLT FC 103 Specifications

General

Brand	Danfoss
Model	VLT FC 103
Category	DC Drives
Language	English