Danfoss VLT Flow Drive FC 111 User Manual

6-93 Terminal 42 Output Min Scale
Default value: 0%
Parameter type: Range
2-setup: All setups
Conversion index: -2
Data type: u_int16
Change during operation: True
Scale for the minimum output (0 mA or 4 mA) of the analog signal at terminal 42. Set the value to be the percentage of the full
range of the variable selected in parameter 6-91 Terminal 42 Analog Output.
Table 179: Range:
Min: 0%
Max: 200%
Default value: 0%
6-94 Terminal 42 Output Max Scale
Default value: 100%
Parameter type: Range
2-setup: All setups
Conversion index: -2
Data type: u_int16
Change during operation: True
Scale for the maximum output (20 mA) of the analog signal at terminal 42. Set the value to be the percentage of the full range of the
variable selected in parameter 6-91 Terminal 42 Analog Output.
Table 180: Range:
Min: 0%
Max: 200%
Default value: 100%
6-96 Terminal 42 Output Bus Control
Default value: 0
Parameter type: Range
2-setup: All setups
Conversion index: 0
Data type: u_int16
Change during operation: True
Holds the level of analog output if controlled by bus.
Table 181: Range:
Min: 0
Max: 16384
Default value: 0
6-98 Drive Type
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: 0
Data type: u_int8
Change during operation: False
Table 182: Range:
Min: 0
Max: 0
Default value: 0
4.9 Parameter Group 8-** Comm. and Options
4.9.1 8-0* General Settings
8-01 Control Site
Default value: [0] Digital and ctrl.word
Parameter type: Option
2-setup: All setups
Conversion index: -
Data type: u_int8
Change during operation: True
This parameter overrules settings in parameter 8-50 Coasting Select to parameter 8-56 Preset Reference Select.
AU363928304090en-000101 / 130R0982 | 103Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English