Danfoss VLT Flow Drive FC 111 User Manual

Table 417: Range:
Min: 0
Max: 4999.000
Default value: 0
22-90 Flow at Rated Speed
Default value: 0
Parameter type: Range
2-setup: All setups
Conversion index: -3
Data type: int32
Change during operation: True
Set the flow value corresponding to flow at rated speed.
Table 418: Range:
Min: 0
Max: 4999.000
Default value: 0
4.17 Parameter Group 23-** Time-based Functions
Parameter group for functions related to the simple timer clock.
4.17.1 23-0* Timed Interval Running Settings
Settings for running the motor for a specific time, at a specific speed, and in a specific direction within a specific interval.
23-05 Interval between operation
Default value: 0 min
Parameter type: Range
2-setup: All setups
Conversion index: 0
Data type: u_int16
Change during operation: True
Interval between start of the motor in minutes. When this parameter is set to 0, the timer function is disabled.
Table 419: Range:
Min: 0 min
Max: 65535 min
Default value: 0 min
23-06 Running time
Default value: 60 s
Parameter type: Range
2-setup: All setups
Conversion index: 0
Data type: u_int16
Change during operation: True
Running time of the motor after start in seconds.
Table 420: Range:
Min: 0 s
Max: 65535 s
Default value: 60 s
23-07 Running speed and direction
Default value: 50 Hz
Parameter type: Range
2-setup: All setups
Conversion index: -1
Data type: u_int16
Change during operation: True
Running speed and direction in Hz. Positive value means Forward, and negative value means Reverse.
Table 421: Range:
Min: -400.0 Hz
Max: 400.0 Hz
Default value: 50 Hz
AU363928304090en-000101 / 130R0982 | 177Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English