Danfoss VLT HVAC User Manual

6.2. Parameter list
Parameters for VLT HVAC Drive FC 102 are grouped into various parameter groups for easy se-
lection of the correct parameters for optimized operation of the frequency converter.
The vast majority of HVAC applications can be programmed using the Quick Menu button and
selecting the parameters under Quick Setup and Function Setups.
Descriptions and default settings of parameters may be found under the section Parameter Lists
at the back of this manual.
0-xx Operation/Display
1-xx Load/Motor
2-xx Brakes
3-xx Reference/Ramps
4-xx Limits/ Warnings
5-xx Digital In/Out
6-xx Analog In/Out
8-xx Comm. and Options
9-xx Profibus
10-xx CAN Fieldbus
11-xx LonWorks
13-xx Smart Logic
14-xx Special Functions
15-xx FC Information
16-xx Data Readouts
18-xx Data Readouts 2
20-xx FC Closed Loop
21-xx Ext. Closed Loop
22-xx Application Functions
23-xx Timed Actions
25-xx Cascade Controller
26-xx Analog I/O Option MCB 109
6. How to programme the frequency converter VLT
®
HVAC Drive Operating Instructions
88 MG.11.A4.02 - 09.10.06. VLT
®
is a registered Danfoss trademark
6

Danfoss VLT HVAC Specifications

General

Brand	Danfoss
Model	VLT HVAC
Category	Controller
Language	English