N O T I C E
Each connection adds a delay to the communication with the next device. The maximum number of devices in a line network is
32. Exceeding this number may reduce the reliability of the network.
9.3 Ring Topology
In a ring topology network, the controller connects to the 1
st
module via a network switch. The 2
nd
Ethernet port of the module
connects to another device, which in turn connects to another device until all devices are connected. The final device connects back
to the switch.
The device supports beacon-based ring node configuration.
Illustration 6: Example of Ring Topology
9.4 Combined Topologies
A single network can include both star and line components.
AN427641276310en-000101 / 175R118732 | Danfoss A/S © 2022.10
Network Design
EtherNet/IP Module
Installation Guide
To Next Page
Loading...
Need help?
General
