Danfoss VLT Micro Drive FC 51 Series Programming Guide

Contents
1. Safety
3
Safety Instructions 3
Software Version and Approvals 3
General Warning 3
Avoid unintended Start 4
Before Commencing Repair Work 4
2. Introduction 5
Type Code 5
3. Programming 7
How to Programme 7
Programming with MCT-10 Set-up Software 7
Programming with the LCP 11 or LCP 12 7
Status Menu 9
Quick Menu 9
Main Menu 10
4. Parameter Descriptions 11
Parameter group 0: Operation/Display 11
Parameter Group 1: Load/Motor 15
Parameter Group 2: Brakes 22
Parameter Group 3: Reference/Ramps 25
Parameter Group 4: Limits/Warnings 30
Parameter Group 5: Digital In/Out 33
Parameter Group 6: Analogue In/Out 37
Parameter Group 7: Controllers 42
Parameter Group 8: Communication 44
Parameter Group 13: Smart Logic 48
Parameter Group 14: Special Functions 55
Parameter Group 15: Drive Information 57
Parameter Group 16: Data Readouts 59
16-09 Custom Readout 59
5. Parameter Lists 63
Conversion Index 67
Change during operation 67
2-Set-up 67
Type 67
0-** Operation/Display 68
1-** Load/Motor
69
VLT
p
Micro Drive FC 51 Contents
MG.02.C4.02 - VLT
p
is a registered Danfoss trademark 1

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English