Danfoss VLT Micro Drive FC 51 Series Programming Guide

4.12. Parameter Group 15: Drive Information
4.12.1. 15-** Drive Information
Parameter group containing information on operating data, hardware configuration, software version, etc.
4.12.2. 15-0* Operating Data
Parameter group containing operating data e.g. Operating Hours, kWh counters, Power Ups, etc.
4.12.3. 15-00 Operating Time
15-00 Operating Time
Range: Function:
0 days * [0 - 65535 days]
View running hours of frequency converter.
The value is saved at power off and cannot be reset.
15-01 Running Hours
Range: Function:
0 * [0 - 2147483647]
View running hours of motor.
The value is saved at power off and can be reset in par. 15-07,
Reset Running Hours Counter .
15-02 kWh Counter
Range: Function:
0 [0 - 65535] View power consumption in kWh as a mean value over one hour.
Reset counter in par. 15-06,
Reset kWh Counter .
15-03 Power Ups
Range: Function:
0 [0 - 2147483647] View number of times frequency converter has been powered up.
Counter cannot be reset.
15-04 Over Temps
Range: Function:
0 [0 - 65535] View number of times frequency converter has tripped due to over temperature.
Counter cannot be reset.
15-05 Over Volts
Range: Function:
0 * [0 - 65535]
View number of times frequency converter has tripped due to over voltage.
Counter cannot be reset.
15-06 Reset kWh Counter
Option: Function:
[0] *
Do Not Reset Counter is not reset.
[1] Reset Counter Counter is reset.
15-07 Reset Running Hours Counter
Option: Function:
[0] *
Do Not Reset Counter is not reset.
[1] Reset Counter Counter is reset.
VLT
p
Micro Drive FC 51 4. Parameter Descriptions
MG.02.C4.02 - VLT
p
is a registered Danfoss trademark 57
4

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English