Danfoss VLT Micro Drive FC 51 Series Programming Guide

Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type 4 - 10 Motor Speed Direction [2] Both directions All set-ups FALSE - Uint8
4 - 12 Motor Speed Low Limit [Hz]
0 Hz All set-ups FALSE
-1 Uint16
4 - 14 Motor Speed High Limit [Hz] 65 Hz All set-ups FALSE -1 Uint16
4 - 16 Torque Limit Motor Mode
150% All set-ups TRUE
0 Uint16
4 - 17 Torque Limit Generator Mode 100% All set-ups TRUE 0 Uint16
4 - 50 Warning Current Low
0 A All set-ups TRUE
-2 Uint32
4 - 51 Warning Current High 26 A All set-ups TRUE -2 Uint32
4 - 58 Missing Motor Phase Function
[1] On All set-ups FALSE
- Uint8
4 - 61 Bypass Speed From [Hz] 0 Hz All set-ups TRUE -1 Uint16
4 - 63 Bypass Speed To [Hz]
0 Hz All set-ups TRUE
-1 Uint16
5.2.9. 4-** Limits/Warnings
5. Parameter Lists VLT
p
Micro Drive FC 51
72 MG.02.C4.02 - VLT
p
is a registered Danfoss trademark
5

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English