Parameter Number Parameter Description Default Value 2 Setup Change During Operation Conversion Index Type
16 - 00 Control Word 0 1 set-up TRUE 0 Uint16
16 - 01 Reference [Unit]
0 1 set-up TRUE
-3 Int32
16 - 02 Reference % 0 1 set-up TRUE -1 Int16
16 - 03 Status Word
0 1 set-up TRUE
0 Uint16
16 - 05 Main Actual Value [%] 0 1 set-up TRUE -2 Int16
16 - 10 Power [kW]
0 1 set-up TRUE
-3 Uint16
16 - 11 Power [hp] 0 1 set-up TRUE -3 Uint16
16 - 12 Motor Voltage
0 1 set-up TRUE
0 Uint16
16 - 13 Frequency 0 1 set-up TRUE -1 Uint16
16 - 14 Motor Current
0 1 set-up TRUE
-2 Uint16
16 - 15 Frequency [%] 0 1 set-up TRUE -1 Uint16
16 - 18 Motor Thermal
0 1 set-up TRUE
0 Uint8
16 - 30 DC Link Voltage 0 1 set-up TRUE 0 Uint16
16 - 34 Heatsink Temp.
0 1 set-up TRUE
0 Uint8
16 - 35 Inverter Thermal 0 1 set-up TRUE 0 Uint8
16 - 36 Inv. Nom. Current
0 1 set-up TRUE
-2 Uint16
16 - 37 Inv. Max. Current 0 1 set-up TRUE -2 Uint16
16 - 38 SL Controller State
0 1 set-up TRUE
0 Uint8
16 - 50 External Reference 0 1 set-up TRUE -1 Int16
16 - 51 Pulse Reference
0 1 set-up TRUE
-1 Int16
16 - 52 Feedback [Unit] 0 1 set-up TRUE -3 Int32
16 - 60 Digital input 18,19,27,33
0 1 set-up TRUE
0 Uint16
16 - 61 Digital input 29 0 1 set-up TRUE 0 Uint8
16 - 62 Analog Input 53 (V)
0 1 set-up TRUE
-2 Uint16
16 - 63 Analog Input 53 (mA) 0 1 set-up TRUE -2 Uint16
16 - 64 Analog Input 60
0 1 set-up TRUE
-2 Uint16
16 - 65 Analog Output 42 [mA] 0 1 set-up TRUE -2 Uint16
16 - 68 Pulse input 33
20 1 set-up TRUE
0 Uint16
16 - 71 Relay Output [bin] 0 1 set-up TRUE 0 Uint8
16 - 72 Counter A
0 1 set-up TRUE
0 Int16
16 - 73 Counter B 0 1 set-up TRUE 0 Int16
16 - 86 FC Port REF 1
0 1 set-up TRUE
0 Int16
16 - 90 Alarm Word 0 1 set-up TRUE 0 Uint32
16 - 92 Warning Word
0 1 set-up TRUE
0 Uint32
16 - 94 Ext. Status Word 0 1 set-up TRUE 0 Uint32
5.2.17. 16-** Data Readouts
5. Parameter Lists VLT
p
Micro Drive FC 51
80
MG.02.C4.02 - VLT
p
is a registered Danfoss trademark
5