EasyManuals Logo
Home>DataCard>Printer>CD820

DataCard CD820 Installation And Administrator's Guide

DataCard CD820
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
SD260L/SD360/SD460 Installation and Administrator’s Guide 69
 ExceptionCardDebowDwellMs—Set the time, in milliseconds, the debow action is applied to
a card. The default is 2000 ms (2 seconds).
 Increase the value to apply the debow action longer.
 Decrease the value to apply the debow action for less time.
Exception Card Impresser Settings:
 ExceptionCardImpressDepth—Set the depth of the impression on a card. The value is in
steps of the impresser punch.
 Increase the value to deepen the impression.
 Decrease the value to lessen the impression.
 ExceptionCardImpressDwellTime—Set the time, in milliseconds, that the impresser remains
in contact with the card. The default is 2000 ms (2 seconds).
 Increase the value to allow the impresser to remain on the card longer.
 Decrease the value to impress the card for a shorter time.
 ExceptionCardImpressPositionOffset1—Set the distance from the trailing edge of the card to
the center of the first impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 ExceptionCardImpressPositionOffset2—Set the distance from the trailing edge of the card to
the center of the second impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
 ExceptionCardImpressPositionOffset3—Set the distance from the trailing edge of the card to
the center of the third impression on the card.
 Increase the offset value to increase the distance of the impression from the trailing edge
of the card.
 Decrease the offset value to decrease the distance of the impression from the trailing
edge of the card.
You may need to adjust the card impress depth value based on the card material
and overlay type used.

Table of Contents

Other manuals for DataCard CD820

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard CD820 and is the answer not in the manual?

DataCard CD820 Specifications

General IconGeneral
BrandDataCard
ModelCD820
CategoryPrinter
LanguageEnglish

Related product manuals