SD260L/SD360/SD460 Installation and Administrator’s Guide 57
Change settings as needed, and then click Set Current to apply changes.
CardRegistration—Set the starting location of the printed area. The values are in mm
(1 mm = 0.0394 in). The setting specifies the distance to move the card before printing.
Increase the value to move printing closer to the card’s leading edge.
Decrease the value to move printing away from the card’s leading edge.
ColorManagement—Specify whether to use color management in the printer.
None disables color management in the printer and allows color management to be
handled by the application.
sRGBColorSpace renders images to look similar to those displayed on PC monitors using
the standard Red, Green, and Blue color space.
MatchSP results in printing that closely matches legacy card printers.
45) KWhiteShade 0 0 [-100 – 100]
46) LeadTrim 0.254 0.254 [0 – 5.08]
47) SettingsGroupPurpose Print Print
48) TPower 0 0 [-100 – 100]
49) TPowerDuplex 0 0 [-100 – 100]
50) TrailTrim 1.47 1.47 [0 – 5.08]
51) TWhiteShade 0 0 [-100 – 100]
52) VerticalOffset 17 14 [-100 – 100]
53) YMCPower 0 0 [-100 – 100]
54) YMCPower600 0 0 [-100 – 100]
55) YMCPowerDuplex 0 0 [-100 – 100]
56) YMCPowerNosRGB -48 -48 [-100 – 100]
57) YMCWhiteShade 0 0 [-100 – 100]
Description Default Value
Current Value
(unit) Allowed Range
To Next Page
Loading...
Need help?
General
Weight and Dimensions
