76 Printer Manager
Update Password
WebAdmin access-level personnel can specify to password protect Printer Manager and limit
access to the advanced settings. Adding password protection is the preferred method of
restricting access to Printer Manager. If no password is assigned, a password is not needed to log
on to Printer Manager.
1. Select the access level for which you want to assign a password. The WebAdmin access level
can update the WebAdmin, WebUser, SnmpRwCommunity, and SnmpRoCommunity
passwords.
2. Enter the current password. If a current password is not set, leave this field blank.
3. Enter the new password in the corresponding field. To remove a password, leave this field
blank.
4. Enter the new password again to confirm it. Leave the field blank if you are removing the
password.
5. Click Update Password to apply the changes.
HINTS & TIPS
Passwords are hierarchical in the following order: WebService, WebAdmin, and WebUser. You
can use a password that is higher in the hierarchy to log on to a specific role.
Passwords may contain the following characters: a–z, A–Z, 0–9, +, and /.
Description Value
Choose Username to Update WebAdmin
Current Password
New Password
Confirm New Password
Caution: Do not change the WebService password.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
