SD260L/SD360/SD460 Installation and Administrator’s Guide 85
5. Click Run to start the cleaning process. Press the U
SER button on the printer when the
message “172: Insert cleaning card” displays on the LCD panel.
The printer picks the cleaning card, moves it through the printer several times, and ejects it in
the output hopper or card reject tray.
6. Remove the used cleaning card. Wait a few minutes for the rollers to dry.
7. Replace the supplies.
a. Place the cards in the input hopper.
b. Replace the print ribbon, if necessary.
c. Replace the cleaning sleeve with a new sleeve and remove the protective cover.
d. Replace the ribbon cartridge and close the printer cover.
Clean the Laminator
1. Select Clean Laminator on the Maintenance > Cleaning page.
2. Click Run.
The printer LCD panel displays the message “172: Insert cleaning card.”
3. Insert the laminator cleaning card into the card exit slot of the laminator and press the U
SER
button.
The laminator pulls the cleaning card from the card exit slot into the laminator and moves it
back and forth through the L1 and L2 cartridge areas and the card entry area several times.
The used card is ejected into the laminator output hopper.
Updates
The Updates option allows a WebAdmin access-level user to send an external settings file to the
printer.
To upload a settings file:
1. Click Browse and select the file to upload.
2. Click Upload File.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
