Datalogic QuickScan Lite QW2100 User Manual

Add-Ons
Product Reference Guide 111
ENTER/EXIT PROGRAMMING MODE
Add-Ons
The following features apply to optional add-ons.
Optional Add-ons
The reader can be enabled to optionally read the following add-ons (supplementals):
•P2
•P5
• GS1-128
NOTE
Contact Customer Support for advanced programming of optional
and conditional add-ons.
NOTE
If a UPC/EAN base label and a an add-on are both decoded, the
reader will transmit the base label and add-on. If a UPC/EAN base
label is decoded without an add-on, the base label will be transmitted
without an add-on.
Conditional add-on settings (if enabled) are considered by the reader
before optional add-on settings.
$CADO200
Optional Add-Ons = Disable P2
$CADO201

Optional Add-Ons = Enable P2
$CADO500

Optional Add-Ons = Disable P5
DEFAULT
DEFAULT

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g