Datalogic QuickScan Lite QW2100 User Manual

Symbologies
140 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Code 32 (Italian Pharmaceutical)
The following options apply to the Code 32 symbology.
Code 32 Enable/Disable
When disabled, the reader will not read Code 32 bar codes.
Code 32 Feature Setting Exceptions
$CP3EN00
Code 32 = Disable
$CP3EN01

Code 32 = Enable
DEFAULT
NOTE
The following features are set for Code 32 by using these Code 39 settings:
Code 39 Quiet Zones on page 131
Code 39 Minimum Reads on page 132
Code 39 Decoding Level on page 133
Code 39 Interdigit Ratio on page 137
Code 39 Character Correlation on page 139
Code 39 Stitching on page 139

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g