Datalogic QuickScan Lite QW2100 User Manual

Product Reference Guide 5
Chapter 2
Getting Started
About the Reader
One distinctive feature offered by the reader is a very wide scan angle which can read long
linearbar codes, such as utlity bills. Whether used in Single Trigger or Continuous Mode,
the ergonomic design of the reader will help to promote comfortable handling during ex-
tended periods of use.
The reader can communicate using the following interfaces:
RS-232 — The reader can communicate with a standard or Wincor-Nixdorf (W-N) RS-
232 host.
RS-232 OPOS — This interface is used for OPOS/UPOS/JavaPOS systems.
Keyboard Wedge (KBW) — When connected using this interface, the host interprets
scanned data as keystrokes and supports several international keyboards (for the Win-
dows
®
environment). See Country Mode on page 54 for a full listing.
USB — Select to communicate either by USB OEM, USB COM STD, or USB Key-
board interface types by scanning the appropriate interface type bar codes available in this
manual. The default interface is USB-KBD for Wedge models (7230) and USB-OEM
for IBM models (7210).
Unpacking
Check carefully to ensure the reader and any accessories ordered are present and undam-
aged. If any damage occurred during shipment, contact
Technical Support on page 3.
KEEP THE PACKAGING. Should the unit ever require service, it should be returned
in its original shipping container.

Datalogic QuickScan Lite QW2100 Specifications

General

Type	Handheld bar code reader
Wavelength	650 nm
Sensor type	Laser
Read rate (max)	400 reads/s
Yaw reading angle	-70 - 70 °
Tilt reading angle	-45 - 45 °
Pitch reading angle	-65 - 65 °
Linear (1D) barcodes supported	EAN 5, EAN-13, EAN-8, GS1-128 (UCC/EAN-128)
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	340 mA
Power source type	DC
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	65 mm
Width	170 mm
Height	70 mm
Weight	119 g